It is not that difficult to clean the air conditioner. The process is simple and easy. Just follow the instructions properly and you will be able to have a healthy environment at home. Just make sure that the cleaning process is done in a regular basis. This will help you maintain the great working condition of your air conditioner.

There are three parts in an outdoor unit. These are the compressor, condenser and the thermostat. You have to clean the air conditioner only when these parts get spoiled. Make ล้างแอร์ to clean the air conditioner at least every six months. This is more than enough time for the filters and the interior to be cleaned without allowing too much dirt to build up.

Any time you clean the air conditioning system, you need to also clean the indoor heating coil. The best way to clean the heating coils is to use the reusable filters. These filters are made from stainless steel, brass, nickel, aluminum and several other types of materials. These filters are easy to remove and replace making it easy for you to maintain the cleanliness of the air conditioning filters.

In order to start cleaning the conditioners you have to remove the front cover of the AC unit. You have to detach the blower wheel and its bracket first. If the conditioner uses a soft brush, you have to make sure that the brushes are properly attached. Clean the dust cap from the rear side of the coil. Then you have to turn on the blower wheel and start cleaning the front part of the coil. You have to make sure that you do not miss any spots as you do this.

After cleaning the blower wheel and the coils it is time to check the other parts of the unit. If the unit's temperature controls are functioning properly then you can proceed to clean the ducts as well. Again make sure that you clean the ducts properly. This is related article on how to clean the air conditioner properly. If you think that these articles are not giving you enough information then you can ask for help from any of the experts in your area.

If you clean air conditioners that have dirty filters then you will not get more than twenty or thirty percent of clean air inside the room. This means that the filters are really dirty when they are not functioning properly. It is important for you to keep these filters clean because if you don't you will not be able to get sufficient air in your room.

Another reason for having dirty air conditioners is that there may be too much dirt and debris trapped within the condenser coil. The condenser coil acts like a funnel by which the hot air is collected. As the condenser coil is heating up and collecting dust and dirt, it will start to expand. In this case the coils will end up clogged.

The best way to remove the dirt from the coils is to use a razor blade. Once you have removed the majority of the dirt you need to make sure that you don't cut the wires and fuses because once they are cut you will never be able to repair them. It is advisable to have a qualified electrician perform the job. Make sure that you ask the person to whom you are going to give the job permission to cut the wires and fuses.

One more common cause of dirt in the conditioner coil is when it has been sitting in storage for a long time. If you have stored it in a dry area, you will find it difficult to remove the dirt. To clean the coil, you can use a clean piece of cloth and remove all the dirt that is stuck inside it. You need to make sure that the cloth is completely dried before you remove any dirt from the wires and fuses. If there is some dirt left on the coil, it is advisable to take a damp cloth and clean the remaining part of the dirt using this cloth. If this still doesn't work you can take a towel or kitchen towel and gently wipe the dirty spot.

When you have cleaned the coil you will then need to make sure that you remove all traces of the cleaning product and replace them with new ones. If the conditioner has just been used the cleaning product may have gotten into the internal parts of the conditioner. In this case it is advisable to open up the conditioner and remove all the parts that are stuck with the cleaning product.

It is very important to make sure that you follow these simple steps. This will help you to prevent the occurrence of dirt in air conditioners and it will also help you to keep them working effectively. If you think that your conditioner is showing signs of damage then it is advisable to contact a local HVAC repair service. They will be able to diagnose the problem and they will be able to recommend the most suitable cleaning products and air conditioning repair tools.