Rod end Spherical plain bearing is a kind of spherical sleeve bearing with a ball end or installed at the end of the spherical rod, which belongs to a kind of spherical sleeve bearing.

The ball joint mainly consists of an inner ring with an outer ball and an outer ring with an inner ball, which can bear a large load. According to its different types and structures, it can bear radial load, axial load, or combined radial and axial load.

It is usually used for low-speed turning movements, but also within a certain angle range for tilting movement, if the support shaft and the hole in the shaft housing are not concentric, it can still work normally.

Self-lubricating seal auxiliary bearings are widely used in water management, professional machinery, and other industries. Because the spherical sliding contact area of ​​the ball joint is large, the angle of inclination is large.

At the same time, because most of the ball joints use special processing methods, such as surface phosphating, electroplating, chrome plating or outer coating of the sliding surface, inlay pad, spraying, etc.

Therefore, it has a higher bearing capacity and impact resistance and has the characteristics of anti-corrosion, wear resistance, self-alignment, good lubrication, or self-lubrication without contamination by lubricating dirt. It can work normally even if the installation is misplaced. Therefore, spherical bearings are widely used in a slow turning movement, tilting movement, and rotating movement.

For details, please visit: https://www.abdultraders.com/